What do I need to know about well water

02 Mar. 20

What do I need to know about well water?

Does your home pull water from a well? It might be nice to have your own water source and not directly rely on a city’s system, but there are some drawbacks as well. With your well, you won’t have as many safeguards in place as the city’s purification system, which means there may be the potential of contaminants seeping into the water. So, if you currently own a home that draws water from a well or you’re considering the purchase of a property that uses well water, you may have found yourself asking the question of “what do I need to know about well water” to plumbing professionals. Well, here is everything you need to keep in mind when it comes to using well water.

What do I need to know about well water?

Here are the answers to your question – What do I need to know about well water:

All The Water Comes From The Ground

The water you draw might come from the well, but the water inside the well comes directly from the surrounding ground. There is a sub-pump installed under the groundwater aquifer. It then pumps water up from the ground and into your home. Due to this, the consistency and makeup of the water can change. If you live on a large plot of land without other buildings nearby, then chances are the water will remain, more or less, the same in terms of its mineral makeup.

However, if you are at the bottom of a hill, or if there are other buildings nearby, runoff from those locations can impact the groundwater, which will then end up inside your home. If there is a farm nearby, the runoff from the farm may end up in the groundwater. Or chemicals from a local plant may seep into the groundwater as well.

With so many variables at play, you need to filter your well water. It is also important to routinely test the well water as well, so you know exactly what kind of contaminants may be within the water.

Staining Water

Have you ever washed clothing, yet when you pulled it out of the wash, there was an odd stain on it? It was as if you had left bleach inside the washing machine, and it pulled color from the clothing. Well, this occurs when you use well water. Because the water reaching your home is pulled directly from the ground, there are different kinds of minerals within the water. This may then react to different soaps and added chemicals within the wash, which will then stain your clothing.

The staining will affect more than just your clothing, though. You might notice stains in your toilet as well. These can be unsightly stains that are orange, pink, rust-like, or any other combination. This isn’t necessarily because plumbing is leaking or rusted. It is because the water you are bringing into the house has additional minerals. Unless you want to be cleaning your toilet bowl every single time you flush (and even then the water that comes in will be discolored), you will need to have a home water purification system installed. This will also extend the life of your toilet.

Smells Funny

Much like the staining caused by the well water, it may also smell strange. The strange odors will come through depending on what kind of minerals end up leaching into the water. You might find the water has a peculiar, egg-like smell to it as if someone dropped an old rotting egg down the sink. This is due to the minerals left within the water and, unless you treat the water, there isn’t anything you can do about it. This funky smell will end up sticking to you when you shower as well as your clothes when you run a wash cycle. It will also cause your dishes to smell, as well. Eventually, you might become accustomed to the smell and not notice it, but everyone else around you will smell it on you (and in the water whenever visiting your home).

Your Water Is Going To Be Hard

With the water running through the ground, it will likely collect different minerals. This will probably give you hard water. Having hard water can cause some issues with your home’s internal plumbing. As the hard water runs through your home, different minerals will begin to collect alongside the plumbing. Over time this will bottleneck different joints within the home’s plumbing network. Eventually, it can cause a pipe to burst or, at the very least, reduce the water pressure in your home. To prevent this from happening and to extend the life of your home’s plumbing system, you will want to treat the water before it runs through the house. The best way to do this is by installing a water filtration system that cleans the water as it enters your property.

Water filters that attach to a faucet or the showerhead might clean the water, but it allows the hard water to still corrode throughout the plumbing. It is less expensive upfront, but you’ll end up paying more down the road to replace all the pipes.

Improve The Quality Of Your Well Water With A Home Water Purification System

Now that you’ve answered “what do I need to know about well water,” The best way to make sure you have the absolute purest water possible is to install a home water purification system. This purification system can be set up correctly for your property to handle whatever contaminants might be present in your well.

With the help of our team at Quality Water of the Carolinas, we will run tests on the water running into your home to identify what sort of purification services you will require. Then from there, we will help you select the perfect system for your home. And all you need to do to take the next step toward cleaner, more refreshing water at home is to pick up your phone and give our team at Quality Water of the Carolinas a call at your earliest convenience. For further questions about “What do I need to know about well water?”, get in touch with us.